Sakai SW880-1, Shop Manual

Page: 165 / 428

6-038
VIBRATORY DRUM
24) Apply molybdenum-based grease to the splined portion of
the sleeve (42).
Fit the sleeve (42) to the splined shaft on the eccentric
shaft end.
25) Apply a thin coat of grease to the O-ring (34).
Install the O-ring (34) on the vibrator motor (27).
26) Secure the vibrator motor (27) in place with the four bolts
(30).
(NOTICE)
When installing the vibrator motor, take care not to
allow the O-ring to protrude from the fitting groove.
N•m
(30) Bolts M10×30 : 60 N·m (44 lbf·ft)
•
•
•
SW880-06046
42
SW880-06046
42
SW880-06047
34
27
SW880-06047
34
27
30 27
SW880-06048
30 27
SW880-06048