VERS. 2017.06.01.
CG 252_MAN_EN
15
5
OPERATING THE MACHINE
In this section you will find tips for using the machine safely.
5.1
Site of work
Remove from the site anything, which might hinder the working procedure!
Make sure the site is sufficiently well lit!
Observe manufacturer's conditions for connecting to power supplies!
Place the electrical cables, the water pipe so as to avoid the possibility of fall and
damage.
Make sure you have a continual adequate view of the working area so you can
intervene in the working process at any time!
Keep other staff out of the area, so you can work securely.
5.2
Specific Adjustment of the machine
To adjust the pressure and the attack of the tools on the ground, you can simply loosen
the indexable joystick and turn the handle then adjust the position of the axis according to
your needs (see photo below).
To adjust the spacing of the wheels of the rear track of the machine it you simply loosen
the screw at the level of the axis of the wheel with the key provided with the machine.
Then adjust the spacing according to your needs for a better stability (see photo below).
