VERS. 2017.06.01.
CG 252_MAN_EN
18
5.3
Polishing and preparation of the ground with the CG 252
To use the CG 252 properly, you must stand behind the machine, taking the two
handles.
To start the machine, press the button "start" (black).
To stop the machine, press the button "Stop" (red).
To get an optimal result during the work of the machine, the machine must not stagnate
in a point, on the contrary, it must be in perpetual motion following the diagram
recommended below:
Machine Guidance
Move the machine from left to right and from the front toward the rear.
NOTE: never leave the machine to turn in continuous on the same place under penalty of
degrade seriously the ground.
WARNING: after the extinction of the machine, the tool continuous to turn up to his full stop.
So, be vigilant to avoid any injury.
