VERS. 2017.06.01.
CG 252_MAN_EN
20
7
FAULTS : CAUSES AND CURES
7.1
Fault-finding procedures
Should any fault occur during the use of the machine, turn it off, and isolate it from the
electrical supply. Any works dealing with the electrical system or supply of the machine can
only be carried out by a qualified electrician.
7.2
Trouble-shooting guide
Panne
Source possible
Résolution
The engine is not
running when the button
"Start" (black) is
pressed.
No electricity
Check the electrical supply
(fuse for example)
Connection cable section too
small
Change connection cable
Defective switch
CAUTION : can only be solved
by qualified electrician
Defective motor
Change motor or contact motor
manufacturer
Defective connection cable
Change connection cable
7.3
Circuit diagram
1 : Control Box
