VERS. 2017.06.01.
CG 252_MAN_EN
16
The machine offers a possibility of easy maneuvering by twisting the head of polishing
following the desired angle.
To do this loosen the indexable joystick
(1)
then rotate the head to the desired angle
depending on the index holes available
(2)
.
The good chosen position, tighten the indexable joystick
(1)
(see photos below).
When a job in a flush to the wall is necessary so you can rotate the head to the desired
angle, but you must also remove the removable cover
(3)
via its two mounting screws
(see photos below), a surplus of dust is possible.
