VERS. 2017.06.01.
CG 252_MAN_EN
5
1
BASIC SAFETY INSTRUCTIONS
The CG 252 is exclusively destined for the polishing and the preparation of the ground with
NORTON polishing and surfacing tools, mainly on construction sites.
Uses other than the manufacturer's instructions shall be considered as contravening the
regulations. The manufacturer shall not be held responsible for any resulting damage. Any
risk shall be borne entirely by the user. Observing the operating instructions and compliance
with inspection and servicing requirements shall also be considered as included under use in
accordance with the regulations.
1.1
Symbols
The advice and warnings are represented by pictograms on the machine. You will find the
following symbols on the machines NORTON. Here is their explanation:
The meanings of these symbols are:
Hearing Protection mandatory
Safety glasses with side protection mandatory
CE marking of the machine
Safety Shoes mandatory
Read the Handbook is mandatory before using the machine
1.2
Machine plate
Important data can be found on the following plate located on the machine :
Machine Model
Machine Code
Weight
Year of production
Maximun tool Diameter
Do not apply
For the
CG 252
Machine Typ
Serial number
Power
Do not apply
For the
CG 252
Tool rotation speed
