Sagem F@st 2644 Reference Manual Download Page 165

Page: 165 / 232

5 - Information / Configuration

SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A

Sagem Communications

document. Reproduction and disclosure prohibited

Page 5-129

5.10.6 Station

Info

Object:

This menu is used to display all the wireless stations certified, with their status.

•

Select

the

Station Info

menu in the

Advanced

Status

section to display

the following

screen:

•

Click on the

button to refresh screen.

Only appear the MAC addresses (BSSIDs) of the computers associated with the
router and/or authorized by this one to use your wireless network
(see subsection 5.7.3 - MAC Filter).

Summary of Contents for F@st 2644









































































































































































































































Search results

Summary of Contents for F@st 2644

Reviews:

Related manuals for F@st 2644

Brands by name

Popular brands

Sagem F@st 2644, Reference Manual

Search results

Summary of Contents for F@st 2644

Reviews:

Related manuals for F@st 2644

Brands by name

Popular brands