5 - Information / Configuration
SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A
Sagem Communications
document. Reproduction and disclosure prohibited
Page 5-45
Proceed as follows:
¾
Check the "
Select a Service
" box, then select the service of your choice from the scroll
down list, for example "SNMP".
The "
External Port Start
", "
External Port End
", "
Internal Port Start
", "
Internal Port End
"
and
Protocol
fields (transport protocol associated with this service) are automatically filled
in the table.
Note:
You may complete the table by adding other ports associated with a protocol.
or
¾
Check the "
Custom Server
" box, enter the name of the server you want to connect to, then:
•
Complete the ID Host of your computer's IP address (this is attributed by your router's
DHCP server).
•
Fill in the "
External Port Start
", "
External Port End
", "
Internal Port Start
",
"
Internal Port End
" and "
Protocol
" fields.
A few rules for entering values:
¾
When you want to select a single port, the start port ("External Port Start" or "Internal
Port Start") and the end port ("External Port End" or "Internal Port End") must be
identical.
¾
When you want to select a range of ports, the start port number must be lower than
the end port number.
¾
You must always start entering with the "External Port Start" and "External Port End"
ports,
¾
When you allocate a number to an "External Port Start", the same number is
automatically allocated to the "Internal Port Start" and identically for
"External Port End",
Summary of Contents for F@st 2644
Page 1: ...SAGEM F stTM 2604 SAGEM F stTM 2644 Reference Manual 253 080 888 A Edition of May 2008...
Page 2: ......
Page 231: ......
