Sagem F@st 2644 Reference Manual Download Page 45

Page: 45 / 232

5 - Information / Configuration

SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A

Sagem Communications

document. Reproduction and disclosure prohibited

Page 5-9

5.6 Internet

Connection

Object:

This menu lets you enter your connection ID and your connection password.

•

Select

the

Internet Connection

heading to display the following connection configuration

screen:

Field

Action

Default:

PPP Username

Enter your connection ID.

This information is provided to you by your

nternet

ervice

rovider (ISP).

Empty

PPP Password

Enter your connection password.

This information is provided to you by your

nternet

ervice

rovider (ISP).

Empty

If the message "

There is no ppp connection

" appears, this means that the

remote network (WAN) parameters have not been filled in (see subsection 5.9.1 -
Advanced Setup / WAN).

Disconnect

When you click on the button “

Disconnect

”:

•

Internet access is no longer possible

•

In the supervision box, indicator “

Internet

” passes from the green to the

yellow

and the text

“Connected” is replaced by “

Waiting for ISP

”.

•

On the front panel, the indicator

@ goes out

Summary of Contents for F@st 2644









































































































































































































































Search results

Summary of Contents for F@st 2644

Reviews:

Related manuals for F@st 2644

Brands by name

Popular brands

Sagem F@st 2644, Reference Manual

Search results

Summary of Contents for F@st 2644

Reviews:

Related manuals for F@st 2644

Brands by name

Popular brands