Sagem F@st 2644 Reference Manual Download Page 91

Page: 91 / 232

5 - Information / Configuration

SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A

Sagem Communications

document. Reproduction and disclosure prohibited

Page 5-55

•

Click on the

Next

button to continue configuring the remote network (WAN) and display

the

following screen:

Depending on the type of network protocol selected, the encapsulation modes
suggested in the scroll down list in the appropriate field are different.

Therefore, and to provide more clarity, a summary table will be presented
below for each type of protocol.

PPP over ATM (PPPoA)

Field

Action

Default

Encapsulation Mode

Select the encapsulation of your choice from the
scroll down list.

•

VC/MUX,

•

LLC/ENCAPSULATION.

VC/MUX

Summary of Contents for F@st 2644









































































































































































































































Search results

Summary of Contents for F@st 2644

Reviews:

Related manuals for F@st 2644

Brands by name

Popular brands

Sagem F@st 2644, Reference Manual

Search results

Summary of Contents for F@st 2644

Reviews:

Related manuals for F@st 2644

Brands by name

Popular brands