Sagem F@st 2644 Reference Manual Download Page 189

Page: 189 / 232

5 - Information / Configuration

SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A

Sagem Communications

document. Reproduction and disclosure prohibited

Page 5-153

5.11.9 Save/Reboot

Object:

This menu lets you save all the modifications made to the current configuration and
restart the router with its new parameters.

•

Select

the

Save/Reboot

menu in the

Management

section to display

the following screen:

Click on the

Save/Reboot

button to restart the router.

The process takes around 1 minute.

A countdown is displayed to tell the user how long is left to wait.

Summary of Contents for F@st 2644









































































































































































































































Search results

Summary of Contents for F@st 2644

Reviews:

Related manuals for F@st 2644

Brands by name

Popular brands

Sagem F@st 2644, Reference Manual

Search results

Summary of Contents for F@st 2644

Reviews:

Related manuals for F@st 2644

Brands by name

Popular brands