Sagem F@st 2644 Reference Manual Download Page 147

Page: 147 / 232

5 - Information / Configuration

SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A

Sagem Communications

document. Reproduction and disclosure prohibited

Page 5-111

Field

Meaning

Group Name

Group name (see "Information" icon).

Enable/Disable

Allows to enable / disable a group of interfaces.

Interfaces

Lists all your router's interfaces.

Note:

Only the "nas_8_50" interface is not resident on the
router. It corresponds to a "Bridge" ATM interface.

Enable/Disable

Allows to enable / disable each interface.

By default, all the interfaces are dedicated to data and are associated with the first
VC (

irtual

hannel) existing or created.

Add

•

Click on the

Add

button to display

the following screen:

Summary of Contents for F@st 2644









































































































































































































































Search results

Summary of Contents for F@st 2644

Reviews:

Related manuals for F@st 2644

Brands by name

Popular brands

Sagem F@st 2644, Reference Manual

Search results

Summary of Contents for F@st 2644

Reviews:

Related manuals for F@st 2644

Brands by name

Popular brands