Sagem F@st 2644, Reference Manual

Page: 72 / 232

5 - Information / Configuration
SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A
Page 5-36
Sagem Communications document. Reproduction and disclosure prohibited
The table below indicates in more detail how to access your Wi-Fi port
(or
A ccess P oint).
Nevertheless, it is best to leave the default values for easier usage.
Field Meaning Default
AP Isolation
Select from the scroll down list:
Off : to not isolate the A ccess P oint i.e.
authorise machines connected to the
router to communicate with each other.
On : to isolate the Access point, i.e. prohibit
machines connected to the router to
communicate with each other.
Off
Band Select the 2.4 GHz band for the IEEE 802.11g
standard. 2.4GHz-
802.11g
Channel
See Wireless/Basic subsection 5.7.1.1.
Auto
Auto Channel Timer (min) Configure the duration, in minutes, during which
the router must seek the best wireless channel.
This option is only available when the selection of
the channel is configured in “
Auto ” (Automatic).
0
54g
TM
Rate In the scroll down list, select the transmission rate
at which the information (data or video) will be
transmitted or received on your wireless network
(Auto, 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 or
54 Mbps).
Note: If you select "Auto", the information will
be transmitted at an optimised rate
which takes account of the transmission
constraints.
Auto
Multicast Rate From scroll down list, select the transmission rate
at which the "Multicast" packets are transmitted
(Auto, 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 or
54 Mbps).
Note: If you select "Auto", the information will
be transmitted at an optimised rate
which takes account of the transmission
constraints.
Video conferencing and teleconferencing are
"Multicast" applications.
Auto
Basic Rate From the scroll down list, select the basic rate at
which the information will be transmitted or
received over your wireless network (Default, All,
1 & 2 Mbps or 1 & 2 & 5.5 & 6 & 11 & 12 &
24 Mbps). Default
Fragmentation Threshold This packet fragmentation mechanism is used to
limit errors and repetitions.
It is recommended not to reduce the packet size
too much to avoid reducing the bandwidth.
Enter a threshold value (in bytes) between 256
and 2347. 2346