![background image](http://html.mh-extra.com/html/sage/930i/930i_operating-manual_799956064.webp)
5-17
© Sage Instruments 2000
9100-2930-02 01/31/00
Sage Instruments 930i Communications Test Set
Sequence Progress
1. Originating end goes off hook and sends digits.
2. Terminating end stores received digits in record (1).
Sequence Progress
1. Originating end seizes the line.
2. Terminating end provides a wink (W).
3. Originating end sends digits.
4. Terminating end stores received digits in record (1).
Sequence Progress
1. Originating end seizes the line .(provides ring ground)
2. Terminating end goes off hook. (provides tip ground) (H)
3. Originating end switches to loop and sends digits.
4. Terminating end stores received digits in record (1).
Typical Sequence
Sequence Type
Ground Start
H1
Immediate Dial
1
Wink Start
W1
5-4.1.1 Parameters
To set the parameters:
1. Press K1 or K2 under
PARAMETERS
. The display reads:
RECORD: 1 18 DIGITS MF EXIT
K1
K2
K3
K4
2. Press K3 to select the signalling type. The display cycles between MF, DTMF, and DP.
3. Use the numeric keypad to enter the length of the number to be received.
• A valid number is between 1 and 18 digits long.
Note: If a call is MF, you do not need to tell the 930i the length of each number because it recognizes
the
KP
and
ST.
4. Use the Up/Down Arrow keys to scroll through records 1-4.
5. Press K4 under
EXIT
to return to the main
SET-UP
display.
5-4.1.2 Sequence
At the terminating end, the
sequence consists of the record
storage location in which the 930i
will store digits received from the
originating end, and the
supervision events sent from the
terminating end to the originating
end.
The table to the right shows the
progress of the four most common
sequence types and the sequence
that should be entered into the
930i at the terminating end to set
it up to receive digits from the
originating end.
Option Menu #:
4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Summary of Contents for 930i
