Sage 930i, Operating Manual, Page: 60 / 236

5-13 © Sage Instruments 2000
9100-2930-02 01/31/00
Sage Instruments 930i Communications Test Set
The display reads:
SELECT BAUD RT PARITY BIT# EXIT
K1 K2 K3 K4
5-3.1.1 Baud Rate
Baud rate is the number of bits of data transmitted per second in a data signal.
To change the baud rate:
1. Press K1 under
BAUD RT.
The display reads:
SET BAUD RATE: 38400
K1 K2 K3 K4
2. Use the numeric keypad to change the baud rate.
• A valid baud rate is between
300
and
38400
. The default value is
38400 baud
.
3. Press ENT or any soft key (K1-K4) to exit this display. You will be returned to the
SELECT
display.
5-3.1.2 Parity
Parity is a method of minimizing errors in data transmissions by adding an extra binary signal to each
character to make the total number of 1s or 0s either odd or even for each character.
To change the parity:
1. Press K2. The display reads:
PARITY: NONE EVEN ODD
K1 K2 K3 K4
2. Press K2 under
NONE
for no parity, K3 for
EVEN
parity, OR K4 for
ODD
parity. The default is
NONE
. You will be returned to the
SELECT
display.
Option Menu #:
3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com