10
2.
Fit the second product beside the first product, ensuring the protruding screws of the second product
engage with slots of the first product (Fig. 20).
3.
Ensure the second product is at the correct height to match the first product and ensure it is adequately
level. This can be done by adjusting the adjustable feet with a flat head screwdriver (Fig. 8).
The levelness of the product can be verified by checking the on-board level (Fig. 9).
4.
Tighten the screws of the second product so that it joins tightly with the first product.
Additional product scan be fitted to the second product by following steps 1-4 above.
