13
M1000
•
is the on/standby button. Press it to turn on and off the flame effect.
•
is used to mute the fire crackling sound. Press this to turn on and off the crackling sound. The
volume can be adjusted on the manual controls of the appliance. Please note that the mute setting
will not be saved after a product restart. The crackling sound can be turned off completely by using
the volume control buttons on the button panel to reduce the volume to its minimum setting. This
minimum setting will be remembered after a product restart.
•
is the reduce flame button. Press the reduce flame button on the second button row to reduce the
height/intensity of the flame on the left hand side of the product. Press the reduce flame button on
the third button row to reduce the height/intensity of the flame on the right hand side of the
product. You will hear an audible beep when you reach the minimum level.
•
is the increase flame button. Press the increase flame button on the second button row to increase
the height/intensity of the flame on the left hand side of the product. Press the increase flame
button on the third button row to increase the height/intensity of the flame on the right hand side of
the product. You will hear an audible beep when you reach the maximum level.
REMOTE CONTROL
The remote control is supplied with 2x AAA-batteries. Remove the battery cover from the underside of the
remote control and after removing the batteries from the plastic wrapping fit them into place. Replace the
battery cover. With the product powered off, a functional test can be carried out on the remote control by
pushing any button and observing the blue LED at the top of the remote flashing with each button push.
Pairing the Remote Control
The remote control has wireless Bluetooth technology and needs to be paired to the receiver. This can be done
by following the steps below.
1. Press the rocker switch to the on ( I ) position: a single beep will be heard.
2. Press the
button on the Button Panel: the product will turn on.
button on the Button Panel: the LEDs will start to slowly blink on and off.
4. Pres the
on the remote control: the product LEDs will flash quickly three times and the product will then
automatically switch off. The remote control is now paired to the product and can be used to switch it back
on.
The operation of the remote control is the same as described in ‘Receiver Controls’. You can pair multiple
products to the one remote control by repeating the pairing operation as above on your subsequent products.
Please note a maximum of six M500 or M1000 products can be paired to the one remote control.
