15
Maintenance
GENERAL TIPS
Only use tap water in this appliance.
Always ensure that the appliance is sitting on a level surface.
If you intend not using the appliance for longer than 2 weeks, remove and empty the sump and water tank.
Once installed, never move this appliance or lay on its back, without draining the water from sump.
CLEANING
Warning
–
Always press Switch
‘A’
to the
‘
OFF
’
(0) position (Fig. 21) and disconnect from the power supply
before cleaning the fire.
We recommend cleaning the following components once every 2 weeks, particularly in hard water areas:
Sump, Nozzle, Tank cap and seal, Air filter.
For general cleaning use a soft clean duster
–
never use abrasive cleaners.
To remove any accumulation of dust or fluff, the soft brush attachment of a vacuum cleaner should occasionally
be used.
Fig.6
