8
4. Unscrew and remove the Live, Neutral and Earth wires (Fig. 7A).
5. Unscrew the cable clamp (Fig. 7B) and remove the supply cord.
6. The electrician can then connect the wire from the appliance to the connection box (by following the steps
above in reverse) ensuring that it incorporates a double pole isolating switch, having a contact separation of at
least 3 mm. Brown
–
Live (L), Blue
–
Neutral (N) and Green/Yellow
–
Earth (E).
INSTALLING THE PRODUCT INTO SURROUND/ENCLOSURE
Once your enclosure has been built to the required dimensions and plumbing and electrical connections have
been installed, follow the steps below to install your product.
1. Sit the product on the constructed base, ensuring the cable and pipes are accessible and not caught under
the product.
2. Ensure that the product is at the correct height to suit the installation and ensure it is adequately level. This
can be done by adjusting the adjustable feet with a flat head screwdriver (Fig. 8).
The levelness of the product can be verified by checking the on-board spirit level which is located on the
metal base towards the back of the fire (Fig. 9).
3. Once the product is at the correct height and is level, centre the product within the opening.