12
The levelness of the product can be verified by checking the on-board level (Fig. 9).
4.
Tighten the screws of the second product so that it joins tightly with the first product.
Additional product scan be fitted to the second product by following steps 1-4 above.
Multiple Product Control
Each product has been supplied with its own link wire in order to form a hardwire link between the multiple
products. Please follow the instructions below to link multiple products together.
1.
Identify the ‘master’ product in the installation. It should be the product on the left hand side of the
installation.
2.
Connect the Bluetooth receiver to this product (M500
–
Fig. 22A, M1000
–
Fig. 23A).
