1
Heat & Glo • LOGS-6KMOD, LOGS-8KMOD Log Instructions • 2584-935 Rev. B • 12/22
Log Set Assembly: LOGS-KMOD
Models: 6KMOD, 8KMOD, MER36MN, MER42MN
LOG PLACEMENT INSTRUCTIONS
Figure 2 Locations for Log Pins
Figure 2
CAUTION:
Logs are fragile, handle with care.
NOTICE: To simplify the installation process, positively
identify each individual log before beginning installation.
See Figure 1.
Leave this manual with party responsible for use
and operation.
Log #1
: Place Log #1 using the #4 and #6 log pins as guides as shown in Figure 4. The left end of the log will align with
the burner screw as shown in the top view illustrated in Figure 5.
44
22
66
55
11
33
77 88
Figure 3 Log Pins Installed (6KMOD / MER36MN Base Pan Shown)
Installation
1. Fill round holes with included log pins as indicated in
Figure 2. Discard remaining log pins. Figure 3 shows
the log pins in the round holes.
Figure 4 Place Log #1
Figure 5 Top View of Log #1 in Position
11
11
BURNER SCREW
BURNER SCREW
Figure 1 Log Identification
LOG PINS
LOG PINS
44
22
66
55
11
33
77
88
99
10
10 12
12
11
11
6KMOD / MER36MN (12 PINS)
8KMOD / MER42MN (13 PINS)
