9
4. With the product in its final position, remove the top plate and screw the product to the surround using the
four fixing holes shown in Fig. 11.
COMMISSIONING/INITIAL PRODUCT START-UP
Connecting the Receiver/Tethered Remote
Insert the 3.5 mm jack of the Bluetooth receiver into the socket at the back of the appliance (Fig. 12). It is
important to ensure that the jack is pushed fully into the socket. Failure to fully insert the jack will prevent the
product from functioning correctly. The receiver has a cable length of 1.4 m which will allow you position it
anywhere around the product. If you prefer to hide it, the receiver can be placed inside the surround/wall.
Please ensure that the receiver is not enclosed in metal, concrete or any other dense material, this will affect the
signal from the remote control.
