MorphoWave
TM
OEM
– Installation guide
Section 6 :Recommendations
74
This document and the information therein are the property of Morpho.
They must not be copied or communicated to a third party without the prior written authorization of Morpho
2015_2000009096 V4
May 2017
Biometric acquisition guidelines
MorphoWave
TM
Desktop is a biometric acquisition terminal which captures fingerprints by the
applicant waving their hand through the active volume. The product can track and capture
simultaneously up to 4 fingerprints at a maximum speed of 0.5m/s.
To acquire fingerprints, the applicant waves his hand between the product glass and the top
protective cap as shown in the figure below.
Figure 29. Capturing Prints
Note: The recommended hand wave direction with index finger first, even though the sensor
will accept both directions.
Capture terminal entry area
