40
Vehicle Belt Installation
WARNINGS:
Do not use the lower
anchor belt along with the vehicle lap or
lap/shoulder belt. Secure lower anchor
hooks to storage attachments as shown
when installing with vehicle belts.
Secure the tether hook when used rear
facing. Attach the tether hook to
storage attachment as shown and gently
tighten to remove slack.
Check vehicle belt before each use.
Use only if the belt can be tightened prop-
erly and locked securely in place.
Failure to follow these warnings can result
in serious injury or death.
39
continued on next page
Safety Tips
Make sure harness and buckle fit your child correctly before
installing the child restraint. See pages 3-5.
Experts agree that children should remain rear facing as long
as possible. In this child restraint, your child can remain rear
facing up to 40 lb (18 kg) and up to 40 in. (101.6 cm).
1.
Recline the Child
Restraint
Pull out on recline handle and
push top of child restraint back.
2.
Adjust Headrest to
Highest Position and
Remove Body Pillows
3.
Undo Fasteners on Seat
Pad and Pull Easy Belt
Access Panel Down
4.
Place Child Restraint
Rear Facing in Back
Seat
For children who cannot sit up
unassisted,
the level line on shell
MUST
be parallel with the ground
using either position
3 or 2
.
For children who can sit up
unassisted,
you may rotate the
child restraint to be more upright.
4358-6835 Grow and Go Air.indd 45-46
4358-6835 Grow and Go Air.indd 45-46
10/29/15 3:34 PM
10/29/15 3:34 PM
