48
9.
Attach Lower Anchor
Hooks to Vehicle’s
Lower Anchors
Review your vehicle owner’s manual
for lower anchor locations and lower
anchor belt use.
10.
Tighten Belt
Place hand in child restraint.
Firmly push down while pulling free
end of belt to tighten.
It may be easier to pull pull the free
end of the belt parallel with the belt
path through the Easy Access Belt
Path panel in pad as shown.
11.
Tighten Tether
Push firmly on the back of the seat
and pull the tether strap to remove all
slack and create tension on the strap.
8.
Loosely Attach Tether
Hook to Vehicle’s
Tether Anchor
Check vehicle owner’s manual for
specific location.
47
12.
Check Belt Tightness
Hold child restraint at the belt path
with your weakest hand.
Push and pull from side to side.
It should not move more than
1 in. (2.5 cm).
To Release Lower Anchor
Belt
Remove child from child restraint.
Remove tension from the lower anchor
belt by pushing down on side of child
restraint with the lower anchor belt
adjuster. Then press the adjuster button
to loosen belt.
Unhook from anchor by squeezing spring
lever on hook, pushing hook back into the
seat bight, and twisting. Then pull it out of
the vehicle seat.
Store lower anchor belt when not in
use. See page 29.
If it moves more than 1 in. (2.5 cm),
you can try:
A.
Reinstalling the child restraint.
B.
Putting your knee in the seat and pulling the belt tighter.
C.
Changing to
a different seating location.
D.
Switching to vehicle belt installation.
7.
Place Child Restraint
Forward Facing Flush
Against Vehicle Seat
Back
Put the child restraint into position
1
.
NOTE:
Do not use any recline
positions except to make the child
restraint flush against the vehicle
seat back. Vehicle seat back must be
upright.
4358-6835 Grow and Go Air.indd 53-54
4358-6835 Grow and Go Air.indd 53-54
10/29/15 3:34 PM
10/29/15 3:34 PM
