53
54
Lap and Shoulder Belt Installation
1.
Place Booster Seat
Forward Facing Flush
Against Vehicle Seat
Back
Put the booster seat into position
1
.
2.
Place Child in Booster
Seat
Tops of child’s ears should be
at the midpoint of the headrest,
but never above the top of the
headrest.
Adjust headrest if needed, see
page 8.
3.
Position Lap Belt on
Child
Route the lap belt portion of
vehicle belt through the booster
belt path as shown.
The lap belt should lay snugly
across the child’s upper thighs and
not on the stomach.
4.
Buckle Vehicle Belt
5.
Position Shoulder Belt
on Child
Slide the shoulder belt under
bottom of the Easy Out Harness
Holder as shown.
Pull up on shoulder belt to tighten.
The shoulder belt should lay
snugly across the center of the
child’s shoulder and across the
chest and not on their face or
neck.
To help position the shoulder
belt, you may need to secure the
shoulder belt in one of the two
shoulder belt-positioning guides
behind headrest pad.
NOTE:
Use the shoulder belt
positioning guide only if necessary
to correctly position the shoulder
belt on the child.
Check periodically to make sure
your child has not moved out of
position and loosened the shoulder
belt.
NOTE:
Do not use any recline positions except to make the
booster seat flush against the vehicle seat back. Vehicle seat
back must be upright.
4358-6835 Grow and Go Air.indd 59-60
4358-6835 Grow and Go Air.indd 59-60
10/29/15 3:34 PM
10/29/15 3:34 PM
