50
Vehicle Belt Installation
WARNINGS:
Do not use the lower
anchor belt along with the vehicle lap or
lap/shoulder belt. Secure lower anchor
hooks to storage attachments as shown
when installing with vehicle belts.
Check vehicle belt before each use. Use
only if the belt can be tightened properly
and securely.
Failure to follow these warnings can result
in serious injury or death.
4.
Loosely Attach Tether
Hook to Vehicle’s
Tether Anchor
Check vehicle owner’s manual for
specific location.
49
5.
Route Vehicle Lap
or Lap/Shoulder Belt
Through Forward-
Facing Belt Path
Review pages 30-31 and your vehicle
owner’s manual to determine what
kind of vehicle belts you have and how
to lock a child restraint in place.
Do not twist belt. Buckle vehicle
belt.
Safety Tips
Make sure harness and buckle fit your child correctly before
installing the child restraint. See pages 3-5.
Experts agree that children should remain rear facing as long as
possible. In this child restraint, your child can remain rear facing up
to 40 lb (18 kg) and up to 40 in. (101.6 cm).
1.
Adjust Headrest to
Highest Position and
Remove Body Pillows
2.
Undo Fasteners on Seat
Pad and Pull Easy Belt
Access Panel Down
3.
Place Child Restraint
Forward Facing Flush
Against Vehicle Seat
Back
Put the child restraint into position
1
.
NOTE:
Do not use any recline
positions except to make the child
restraint flush against the vehicle
seat back. Vehicle seat back must be
upright.
6.
Replace Easy Access
Belt Panel
Attach seat pad fasteners. If you
would like, you may put the body
pillows back in seat.
Adjust the headrest/harness to the
proper height for your child
.
See
page 5 for fi t guidelines.
continued on next page
4358-6835 Grow and Go Air.indd 55-56
4358-6835 Grow and Go Air.indd 55-56
10/29/15 3:34 PM
10/29/15 3:34 PM
