INTEGRA-X User Manual
WEB GUI
SAF Tehnika JSC
36
CLI commands
See Chapter 4: COMMAND LINE INTERFACE
radio [status]
Use to show the radio status.
radio power {A|B} <Tx power>
Use to set Tx power in dBm for A or B
channel.
radio frequency {A|B} <frequency>
Use to set Tx frequency in kHz.
radio tx-mute {A|B} <time>|disable>
Use to mute a transmitter on a specific time
in seconds or unmute. If you mute Tx, the A
or B link will come down for a given time.
radio rssi
Display current RSSI settings.
radio rssi-led
Display current RSSI settings.
radio rssi audio <disable / enable>
Use to enable or disable RSSI audio
operation.
radio rssi channel {A|B}
Use to switch A or B channel to RSSI audio
port indication.
radio rssi-led led {disable | enable }
Use to enable or disable RSSI LED operation.
radio rssi-led mode {1|2|3}
Use to enable or disable the RSSI LED's
operation. . Example: “radio rssi-led mode 2”
put LED on FODU in mode 2. For details refer
to page
”.
radio rssi-led channel {A|B}
Use to switch the RSSI LED's for A or B
channel indication.
modem allowed show <
configuration name
>
Use to check modem profile parameters.
modem configuration set <configuration
name>
Use to set modem configuration described
by configuration name.
modem configuration set factory
Use to reset modem settings to factory
defaults – bandwidth and modulation will
be reset to a minimum.
modem loopback [{none | digital <time>}]
Use to check, disable, or enable modem
loopback for n seconds.
radio factory {A|B}
Use to reset radio settings to factory defaults
– Tx power will be disabled and frequencies
set to factory defaults. Could be executed
separate for each radio.
radio info
Use to check the radio software version
radio upgrade {A|B} <firmware>
Use to upgrade radio firmware version.
Firmware file must be located in FTP
directory.
