INTEGRA-X User Manual
WEB GUI
SAF Tehnika JSC
50
Modify mode
Figure 3-40 Sensor configuration
1)
Group description (name)
– By default shows 5 groups of sensors divided by different group
data destinations (event; perf; SNMP), as well as indicates whether the group is enabled
(State);
2)
Ungrouped sensor list
– Shows list of sensors not added to any of the existing groups
(status mode); allows dragging to any of the existing groups, thus specifying how the sensor
will be treated. Unchecking the checkbox next to the sensor disables the sensor (modify
mode).
3)
+/
- opens the dropdown box with sensors in the group. Sensors from the ungrouped sensor
list or other groups can be added to the group by dragging them in. Unchecking the
checkbox next to the sensor disables the sensor in its’ corresponding group (modify mode).
4)
Add group
– Allows creating a new group with a custom name and description, see
Figure 3-41
Afterward, sensors from the ungrouped sensor list or other groups can be added to the
group by dragging them in.
5)
Remove group
