INTEGRA-X User Manual
WEB GUI
SAF Tehnika JSC
38
added to the untagged ingress packets. VLAN ID will be removed according to the
tagged/untagged configuration, of that particular port.
3)
Name
– Indicates configured (if assigned) VLAN ID or VLAN ID range names (status mode);
allows entering a name for each individual entry, i.e. individual VLAN ID or VLAN ID range
(modify mode).
4)
VID (1 .. 4094)
– Indicates configured VLAN IDs and VLAN ID ranges (status mode); allows
entering individual VLAN IDs or VLAN ID ranges, e.g. “100-300”, “500” (modify mode).
5)
T/U/D
– Indicates whether VLAN ID entries are configured in U - untagged (access) mode,
T - tagged (trunk) mode or D - disabled (status mode); allows changing VLAN mode on LAN
and WAN ports (modify mode). Changing from T to U will change previous untagged VLAN
ID on the same port to T (trunk) mode and will highlight this change in yellow color. Note
that only single U (untagged) VLAN ID can be configured on each available port.
6)
MNG
– indicates management VLAN ID (status mode); allows specifying which individual
VLAN ID will be used for management access (modify mode).
7)
Add / Delete
– Press “Add” to add entered individual VLAN ID or VLAN ID range or press red
cross (
×
) to delete the VLAN entry;
8)
By pressing
„Execute configuration”,
changes made to the corresponding section apply only
to the local side Integra-X. If
„Rollback on”
is selected, the configuration will be reverted in
case erroneous configuration changes are applied and management connection between
link sides lost.
CLI commands
See Chapter 4: COMMAND LINE INTERFACE
network vlan set mng
<1…4094>
Use to set Management (MNG) VLAN ID.
network vlan set mode
{disable|enable}
Use to set VLAN operation mode. “disable” – packets
ingress/egress unmodified; “enable” – packets are
handled according to VLAN configuration
network vlan set vid <1…4094>
add {tagged|untagged}
{LAN1|LAN2|LAN3|WAN}
Use to add VLAN ID as a tagged (trunk) or untagged
(access) type on a specified port.
network vlan set vid <1…4094>
delete {LAN1|LAN2|LAN3|WAN}
Use to delete VLAN ID on a specified port.
network vlan set vid <1…4094>
name <name>
Use to name a VLAN ID. Same name can be applied for
multiple VLAN IDs.
network vlan set default vid
<1…4094>
Use to set default VLAN ID for untagged packets.
network vlan show summary
Use to show general VLAN configuration summary.
network vlan show default
Use to show the configuration of untagged packets.
network vlan show mng
Use to show Management (MNG) VLAN ID.
network vlan show mode
Use to show current VLAN operational mode and custom
EtherType ID.
network vlan show vids
Use to show currently configured VLAN IDs on all ports.
