SAF Integra-X, User Manual

Page: 99 / 127

INTEGRA-X User Manual COMMAND LINE INTERFACE
SAF Tehnika JSC 99
Connecting to Telnet
A telnet connection to the Integra-X FODU is carried out using the Ethernet management
connection. Ethernet management port connection details are described on page
22 “Ethernet
management connection configuration”.
By default Telnet service is disabled. See the Chapter System  Configuration  System
services” CLI commands on how to manage system telnet service.
You can use any Telnet client. Below are connection steps with PuTTY - Windows freeware
software.
1) Open PuTTY , choose “Connection Type”: “Telnet”, enter the IP address and make sure that
the correct port number is used (“23” by default).
Figure 4-8 Telnet connection by Putty
2) Press “Open” to connect. After successful connection following prompt should appear,
see
Figure 4-9 .
Figure 4-9 Telnet login prompt
3) Enter the username and password. Default credentials are as follows:
login: admin
password: changeme
4) After successful login “SAF>” prompt should appear (prompt will differ if system name is
not the default one):
Figure 4-10 System prompt