Saeco D.A. 8P Instant, Operation And Maintenance

Page: 25 / 40

English
25
BEVERAGE A BEVERAGE A
BEVERAGE A BEVERAGE A
BEVERAGE A
SEQUENCE: C300 SEQUENCE: C300 SEQUENCE: C300 SEQUENCE: C300 SEQUENCE: C300
It defines the order in which products beverage is made of are
prepared and dispensed (A in this case).
Important
In this function no product matches with 0. Therefore, with a
combination of digits “
C 3 0 0 C 3 0 0 C 3 0 0 C 3 0 0 C 3 0 0
” or “
C 0 3 0 C 0 3 0 C 0 3 0 C 0 3 0 C 0 3 0
” or “
0 C 3 0 0 C 3 0 0 C 3 0 0 C 3 0 0 C 3 0
” ,
coffee beans (standard version) first and then product 3 will
be dispensed.
In the instant version, sequence is displayed with a series of
number, letter “
C C C C C
” does not appear (referred to coffee beans
only).
In accordance with the sequence parameters settings concerning
products the beverage is made of will be requested.
BEVERAGE A BEVERAGE A BEVERAGE A BEVERAGE A BEVERAGE A
SOLUBLE 3: 005 SOLUBLE 3: 005 SOLUBLE 3: 005 SOLUBLE 3: 005 SOLUBLE 3: 005
It defines the quantity of soluble product to mix with water.
Example: 005 indicates that 5 units of soluble product 3 will be
utilised. Reference unit is preset by the manufacturer.
Important
The quantity of soluble powder is adjustable from 0 to 250
with steps of 1. The product dispensing does not occur when
the parameter is set on “
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
” .
BEVERAGE N BEVERAGE N BEVERAGE N BEVERAGE N BEVERAGE N
WATER 3: 022 WATER 3: 022 WATER 3: 022 WATER 3: 022 WATER 3: 022
It defines the quantity of water to mix with soluble in powder.
Example: 3 indicates that water will be mixed with soluble product
3. 022 indicates that 22 units of water will be dispensed into the
soluble product. Reference unit is preset by the manufacturer.
Important
The quantity of water is adjustable from 0 to 250 ml with
steps of 1. Water dispensing does not occur when parameter
is set on “
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
” .
BEVERAGE A BEVERAGE A BEVERAGE A BEVERAGE A BEVERAGE A
% SOLUBLE 3: 100 % SOLUBLE 3: 100
% SOLUBLE 3: 100 % SOLUBLE 3: 100
% SOLUBLE 3: 100
It defines the speed with which the soluble powder and the water
are dispensed in beverage A.
Important
Setting a value of 10, the pump works at the maximum deliv-
ery, while soluble product is dispensed, with impulses, at the
minimum capacity.
Setting 100 both the soluble product and water will be dis-
pensed at the maximum capacity.
Setting 190 the pump works, with impulses, at minimum ca-
pacity, while soluble product is dispensed at the maximum
capacity.
Important
Dispensing speed of soluble powder and hot water is adjust-
able from 10 to 190 with steps of 10.
In case the sequence expects more soluble products, the sequence
“
SOLUBLE - WATER - % SOLUBLE SOLUBLE - WATER - % SOLUBLE
SOLUBLE - WATER - % SOLUBLE SOLUBLE - WATER - % SOLUBLE SOLUBLE - WATER - % SOLUBLE ” will appear
again.
Important
If parameter programming concerning soluble (soluble, solu-
ble water and % soluble) is such to extend powder dispensing
beyond water dispensing, the vending machine stops pow-
der dosing and emits a beep (insufficient mixer rinsing). Check
again the set parameters to obtain a correct dispensing (pow-
der dispensing must end a few instants before the end of water
dispensing to allow a good rinsing of the mixer).
BEVERAGE A BEVERAGE A
BEVERAGE A BEVERAGE A
BEVERAGE A
COFFEE: 38
COFFEE: 38 COFFEE: 38 COFFEE: 38 COFFEE: 38
(8P standard only)
It defines the quantity of coffee to dispense.
Example: 38 indicates that 38 ground coffee units will be dis-
pensed. Reference unit is preset by the manufacturer.
Important
The quantity of dispensable coffee is adjustable from 0 to
500 with steps of 2. Product dispensing does not occur when
parameter is set on “
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
” .
BEVERAGE A BEVERAGE A BEVERAGE A BEVERAGE A BEVERAGE A
S U G A R : 0 S U G A R : 0
S U G A R : 0 S U G A R : 0 S U G A R : 0
It allows to set the standard quantity of sugar to be dispensed with
the beverage. The choice is among 0,1,2,3,4 and NO. In the
example, the standard quantity of sugar to dispense is equivalent
to “
0 0
0 0
0
” . The user, during beverage dispensing, can vary the quan-
tity. Selecting “
N O N O N O N O N O
” a beverage without sugar will be dispensed
to which it is not possible to add any sugar.
Reference unit is preset by the manufacturer.
BEVERAGE A BEVERAGE A
BEVERAGE A BEVERAGE A BEVERAGE A
BEVERAGE CHECK BEVERAGE CHECK
BEVERAGE CHECK BEVERAGE CHECK BEVERAGE CHECK
It allows to perform dispensing tests on the beverage just set. By
pressing “ENTER” ”
N BEVERAGE – PRESS KEY N BEVERAGE – PRESS KEY
N BEVERAGE – PRESS KEY N BEVERAGE – PRESS KEY N BEVERAGE – PRESS KEY ” it is
possible to choose the type of test dispensing that you want to run
on that beverage.
- A key full beverage
- B key beverage without cup, sugar and stirrer
- C key water only
- D key powder only
- E key sugar and stirrer
- F key -
-
G key
-
- H key -