Saeco D.A. 8P Instant, Operation And Maintenance

Page: 31 / 40

English
31
Stirrer dispenser
To reload the stirrer dispenser (ref. 20 , fig. 20) you need to:
- Open front door (ref. 1 , fig. 1).
- Loosen knob (ref. A , fig. 20).
- Rotate externally the container (ref. B , fig. 20).
- Pull out the counterweight (ref. C , fig. 20).
- Fill stirrer container (ref. D , fig. 20).
- Replace counterweight.
Important
Check the correct position of stirrers inside the container. Use
stirrers suitable to automatic dispensing, without defects and
fit to the size shown in figure (fig. 21).
- Replace container in initial position.
- Tighten knob (ref. A , fig. 20).
fig. 20
99588.16
C
A
D
B
20
fig. 21
99588.25
Cup dispenser
To load cup dispenser you need:
-
Open front door (ref. 1 , fig. 1).
- Open dispenser door (ref. 22 , fig. 1 and 22).
Danger
It is forbidden rotate cup dispensing tube (ref. A , fig. 22) with
vending machine front door closed (ref. 22 , fig. 1 and 22).
This operation has to be done by checking visually the rota-
tion of the dispensing tube.
- Remove, if any, external columns formed by spare cups (ref. B ,
fig. 22).
Danger
Before rotating cup dispensing tube you always need to re-
move external columns formed by spare cups
Not complying with these simple warnings can cause dam-
age to cup dispenser.
COMPLY WITH warnings ESPECIALLY in the following refillings.
fig. 22
99588.30
1
1
2
3
4
5
6
7
8
A
H
22
B
Y
D