Saeco D.A. 8P Instant, Operation And Maintenance

Page: 21 / 40

English
21
SYSTEM MANAGEMENT SYSTEM MANAGEMENT
SYSTEM MANAGEMENT SYSTEM MANAGEMENT
SYSTEM MANAGEMENT
This function allows to set the following parameters:
L A N G U A G E L A N G U A G E L A N G U A G E L A N G U A G E L A N G U A G E
It allows to select the language to be used by the vending machine.
V M C O D E V M C O D E
V M C O D E V M C O D E
V M C O D E
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
(modifiable)
It allows to assign an identification code for each vending ma-
chine.
S T O P S T O P S T O P S T O P S T O P
It allows to set the maximum number of dispensable coffee, bever-
age or soluble powder quantity. Once reached the maximum
amount, the vending machine stops the dispensing of relevant
beverages. When the dispensing red light turns on (ref.
SP , fig. 7)
it means that limit has been reached.
Numbers preceded by “
* * * * * * * * * *
” , refer to product quantity (coffee,
beverage or soluble) dispensed by the last “
RESET STOP RESET STOP
RESET STOP RESET STOP RESET STOP ”
(not modifiable value), if preceded by “
L I M L I M
L I M L I M
L I M
” it means the maxi-
mum dispensable quantity (modifiable value).
By pressing “ENTER” you access individual stops selection.
7.4 Description of menus
For the procedures to adopt, in modification and parameter set-
ting operations, see chapter “7.3
Parameter modification and
storage” .
ENTER PASSWORD ENTER PASSWORD
ENTER PASSWORD ENTER PASSWORD ENTER PASSWORD
At the programming mode entry, a password is requested, to al-
low proceeding with the programming. The default password is
“
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0
” . In this case, at the beginning of the programming, it
is not requested. To set it see “
CHANGE PASSWORD CHANGE PASSWORD CHANGE PASSWORD CHANGE PASSWORD CHANGE PASSWORD
”.
Take note of the new password.
SYSTEM MANAGEMENT
VM CODE
000000
MIN. TEMPERATURE
T:080
MIN. TEMPERATURE
T:080
MIN. TEMPERATURE
T:099
MIN. TEMPERATURE
T:099
STOP
ENTER PASSWORD
0000
LANGUAGE
ENGLISH
Example of parameter setting
“
MIN. TEMPERATURE MIN. TEMPERATURE MIN. TEMPERATURE MIN. TEMPERATURE MIN. TEMPERATURE
”