100
CYLINDER HEAD / VALVES
Install the valve spring seats, springs and retainers.
NOTE
Install the valve springs with the narrow pitch end facing down.
Compress the valve spring and install the valve cotters.
CAUTION
To prevent lass of tension, do not compress the valve
spring more than necessary.
TOOLS:
Commercially avail able tools.
Tap the stems gently with a plastic hammer to fi rmly seat the
cotters.
CAUTION
Support the cylinder head above the work bench surface
to prevent valve damage.
Apply clean engine oil to the camshaft and camshaft bearings.
Install the camshaft into the cylinder head with the cam lobes
facing the combustion chamber.
NOTE
The camshaft can be installed after the cylinder head has been
installed.
Coat the rocker arm shafts with fresh engine oil. Install the
rocker arm shafts and the rocker arms.
NOTE
Be sure the shaft threads are facing outward.
Install a new gasket onto the right side cover, then install the
cover.
Summary of Contents for madass
