![background image](http://html.mh-extra.com/html/sabo/54-a-economy/54-a-economy_operators-manual_795055062.webp)
12
GB
Turbo signal (shows when the grass collector is full) (Illustration J + K )
There is an indicator on the top of the collector that shows whether the collector is empty or full:
– The collector indicator inflates if the collector is empty and during the mowing
J
.
– If the collector is full, the indicator collapses; once this happens, stop mowing immediately and empty the collector
K
.
IMPORTANT
If the fabric of the grass collector is very dirty the turbo indicator will not inflate – in this case, clean the fabric
immediately. The grass collector will only collect grass perfectly if it is permeable to air.
IMPORTANT
Do not clean the grass collector with hot water!
Emptying the grass collector (Illustration L )
– Switch off engine.
– Lift ejection flap.
– Unhinge the full grass collector from the mower at the carrying strap – the ejection flap closes automatically.
– Empty the collector thoroughly whilst holding it by the carrying strap and the moulded handle on the bottom.
Operation without grass collector
WARNING
When mowing without grass collector the ejection flap on the mower housing must always be closed (flap down).
15
CARE AND SERVICING OF YOUR LAWNMOWER
Regular care is the best guarantee of long working life and trouble-free operation!
Only use original spare parts because only those guarantee safety and quality!
Safety instruction!
See table for explanation of symbols page 3
Cleaning (Illustration O )
IMPORTANT
When carrying out cleaning and maintenance work do place the mower on its left side (in the direction of travel), as
otherwise you may have difficulties starting it up again.
ATTENTION
When tilting or placing the mower on its side, ensure that no oil or fuel comes out of the machine. Fire hazard!
Remove dirt and grass residue immediately after finishing mowing. Use a brush or cloth to clean.
Do not turn the blade bar as this pumps motor oil into the carburettor/air filter and may cause trouble when trying to start up
again.
ATTENTION
Do not put your fingers into the openings of the fan housing and hold onto the fan. If the blade bar is rotated during
cleaning, there is a risk that your fingers may become caught between the fan and the fan housing!
IMPORTANT
Never use a pressure cleaner or ordinary water jet to clean the drive section, motor parts (like ignition system,
carburettor etc.), and bearings. Damages or expensive repairs can be the consequence of such action.
Storage
Always keep the machine in a clean condition in a closed, dry room out of reach of children. Always allow the engine to cool
down before you store the machine in a closed room.
Collapsing the handle (Illustration A1 )
– To save storage space or for transportation, loosen the four grip nuts so that the guide tube can be folded together
without resistance in a Z-shape above the engine
A1
.
The locking cams on the bottom bar end must snap out of the holes on the bar connection.
– Do not kink nor squeeze the throttle cables in the process.
CAUTION
When folding the bar for transport and storage purposes, when loosening the grip nuts and snapping the locking
cams from the drilled holes of the bar connection, it is possible that unintentional upsetting of the bar may occur. In
addition, this may result in crushed points between the top and bottom part of the bar as well as the bar
connection/housing. This may result in a risk of injury!
Summary of Contents for 54-A ECONOMY
