8 — English
UNPACKING
This product requires assembly.
Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
WARNING:
Do not use this product if any parts in the
Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call
1-800-860-4050 for assistance.
PACKING LIST
Log Splitter
Wheel (2)
Hardware Bag
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
WARNING:
Do not connect to power supply until assembly is com-
plete. Failure to comply could result in accidental starting
and possible serious personal injury.
PRODUCT SPECIFICATIONS
Splitting Force ........................................................... 5 tons
Oil Capacity ............................................................. 3.4 qts.
Input ....................... nominal 120V/60Hz AC only, 15 Amps
Log Capacity Diameter, maximum ............................. 10 in.
Log Capacity Diameter, minimum ................................ 4 in.
Log Capacity Length ............................................... 20.5 in.
KNOW YOUR LOG SPLITTER
See Figure 2.
The safe use of this product requires an understanding of
the information on the product and in this operator’s manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all op-
erating features and safety rules.
BLEED SCREW
Loosen the bleed screw to ensure the smooth flow of air in
and out of the oil tank.
HYDRAULIC CONTROL LEVER
Push down on the hydraulic control lever and the ram starts
pushing the log into the wedge.
LIFT HANDLE
The lift handle makes rolling the log splitter from one location
to another simple and easy.
OIL DRAIN BOLT/DIPSTICK
The oil drain bolt/dipstick makes checking and changing
hydraulic oil easy.
SIDE SUPPORTS
Side supports on each side of the work table keep logs
resting securely on the log splitter.
WORK TABLE
Provides surface to support log prior to splitting operation.
FEATURES
ASSEMBLY
