Ryobi RLM3615, Original Instructions Manual

Page: 6 / 220

collection or discharge of grass clippings.
■
New or thick grass may require a higher
cutting height.
■
If you wish to collect the grass cuttings for
disposal, remove the mulching plug and fit
the grass catcher making sure the top flap
is properly closed. Empty the grass catcher
regularly, otherwise the discharge chute
will become blocked with grass cuttings.
■
If you are making a light cut and wish for
the grass cuttings to remain on the lawn,
fit the mulching plug and close the top flap
to cover the discharge opening. It is not
necessary to fit the grass catcher in this
case.
■
The mower is designed to operate and cut
most effectively when moving forwards.
TRANSPORTATION AND STORAGE
■
Turn off the product and disconnect it from
the power supply. Make sure all moving
parts have come to a complete stop. Allow
the product to cool down before storing or
transporting.
■
Clean all foreign materials from the product.
Store the product in a cool, dry, and well-
ventilated place that is inaccessible to
children. Keep away from corrosive agents
such as garden chemicals and de-icing
salts. Do not store outdoors.
■
For transportation, secure the product
against movement or falling to prevent
injury to persons or damage to the product.
WARNING
Use extreme caution when lifting or tilting
the product for maintenance, cleaning,
storage, or transportation. The blade is
sharp, keep all body parts away from the
blade while it is exposed.
MAINTENANCE
WARNING
Use only original manufacturer’s
replacement parts, accessories, and
attachments. Failure to do so can cause
injury, can contribute to poor performance,
and may void your warranty.
WARNING
Servicing requires extreme care and
knowledge and should be performed only
by a quali fi ed service technician. Have the
product serviced by an authorised service
centre only. When servicing, use only
original replacement parts.
■
Turn off the product and disconnect it from
the power supply. Make sure that all moving
parts have come to a complete stop before
any cleaning or maintenance task.
■
You may make adjustments and repairs
described in this manual. For other repairs,
contact an authorised service centre.
■
Replace worn or damaged parts for safety.
■
Check the grass catcher frequently for
wear or deterioration.
■
After each use, clean the product with a
soft, dry cloth. Any part that is damaged
should be properly repaired or replaced by
an authorised service centre.
■
Check all nuts, bolts, and screws at frequent
intervals for proper tightness to ensure the
product is in safe working condition.
■
Be careful during adjustment of the product
to prevent entrapment of the fingers
between moving blades and fixed parts of
the product.
■
When servicing the blades, be aware that
even though the power source is switched
off, the blades can still be moved.
■
The blade on the product is sharp. Use
extreme caution and wear heavy-duty
gloves when fitting, replacing, cleaning or
checking bolt security.
■
Replace damaged blades and bolts in sets
to preserve balance.
CLEARING BLOCKAGES
■
Turn off the product and disconnect it from
the power supply.
■
Always wear heavy-duty gloves when
checking or clearing a blockage.
■
The blades are sharp and the blockage
itself could be a sharp object.
■
Remove the grass collector, check for and
carefully clear obstructions.
■
Check the grass discharge chute for
blockages and carefully clear.
4 | English