Ryobi PCL801, Operator'S Manual

Page: 8 / 36

8 - English
USING PROPANE (LIQUID PROPANE ALSO
CALLED LIQUID PETROLEUM)
Propane is highly flammable and may ignite unexpectedly
when mixed with air. The propane cylinder used with this
forced air heater must meet the following requirements:
 Constructed and marked in accordance with the Speci-
fications for LP Gas Cylinders of the U.S. Department
of Transporation (D.O.T.) or the
National Standard of Canada,
CAN/
CSA-B339, Cylinders, Spheres, and
Tubes for Transportation of Danger-
ous Goods and Commission
.

Measurements: 12 in. diameter x 18
in. tall with 20 lb. maximum capacity.
 Cylinder valve must have:
— Cylinder connection device (Type 1) compatible with
the connector for the propane heater
— Safety relief valve
— UL listed Overfill Protection Device (OPD). This OPD
safety feature is identified by a unique triangular
handwheel. Use only propane cylinders with this type
of valve.
 Arranged for vapor withdrawal and include collar to protect
propane cylinder valve. Always keep propane cylinder in
upright position during use, transport, or storage.
TESTING THE PROPANE CYLINDER
See Figure 1, page 13.

Make sure the propane cylinder is disconnected from the
propane hose and regulator.
UNPACKING
This product requires assembly.

Carefully remove the tool and any accessories from the
box. All items listed in the Includes section must be
included at the time of purchase.
WARNING:
Items in this
Assembly
section are not assembled to the
product by the manufacturer and require customer instal-
lation. Use of a product that may have been improperly
assembled could result in serious personal injury.

If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories or attachments not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to pos-
sible serious personal injury.
OPD HANDWHEEL
PRODUCT SPECIFICATIONS
Dual Power Source .......................................18 Volt Battery
or 120 Volts, AC only, 60Hz
Output .................................................30,000 – 60,000 BTU
Fuel Source ..................................... Propane (not included)
The following tools (not included) are needed for assembly and making adjustments:
Adjustable wrench
FEATURES
ASSEMBLY
TOOLS NEEDED