Ryobi 1501130, Original Instructions Manual

Page: 20 / 188

4 | English
Ŷ
When servicing, use only identical
replacement parts. Use of any other
parts may create a hazard or cause
product damage.
Ŷ
Avoid using solvents when cleaning
plastic parts. Most plastics are
susceptible to various types of
commercial solvents and may be
damaged by their use. Use clean
cloths to remove dirt and carbon dust.
Ŷ
Do not, at any time, let brake fluids,
gasoline, petroleum-based products,
penetrating oils, etc., come in contact
with plastic parts. They contain
chemicals that can damage, weaken,
or destroy plastic.
Ŷ
Always wear safety goggles or safety
glasses with side shields during power
tool operation or when blowing dust.
If operation is dusty, also wear a dust
mask.
Ŷ
For greater safety and reliability, all
repairs should be performed by an
authorised service centre.
LUBRICATION
All of the bearings in the product are
OXEULFDWHG ZLWK D VXI¿FLHQW DPRXQW RI
high grade lubricant for the life span
of the product under normal operating
conditions. Therefore, no further
lubrication is required.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead
of disposing of as waste. The
machine, accessories, and
packaging should be sorted for
environment-friendly recycling.
SYMBOLS
Safety alert
CE conformity
EurAsian Conformity Mark
Ukrainian mark of
conformity
Please read the instructions
carefully before starting the
machine.
Please read the instructions
carefully before starting the
machine.
Class II equipment
For indoor use only
No-load speed
Polarity of USB plug
V Volts
Direct current
min -1
Revolutions or
reciprocations per minute
Waste electrical products
should not be disposed
of with household waste.
Please recycle where
facilities exist. Check with
your local authority or
retailer for recycling advice.
SYMBOLS IN THIS MANUAL
Note
Parts or accessories sold
separately
The following signal words and meanings
are intended to explain the levels of risk