RUSH Strobe CWL
TM
User Manual
13
The fixture has an auto-ranging power supply that accepts AC mains power at
100-240 V at 50/60 Hz. Do not apply AC mains power at any other voltage or
frequency to the fixture.
Linking fixtures to power in a chain
If you obtain a 16 A rated, 14 AWG / 1.5 mm
2
power input cable and 16 A
rated, 14 AWG / 1.5 mm
2
throughput cables from Martin™ (see ‘Accessories’
on page 29), you can relay mains power from one fixture to another by
connecting fixtures to power in a linked daisy-chain, MAINS OUT throughput
socket to MAINS IN input socket. Using this method, you can link a maximum
of four (4) RUSH Strobe CWL
TM
fixtures in total to power in a chain.
If you install a power plug on the 14 AWG / 1.5 mm
2
power cable, install a
grounding type (earthed) plug with integral cable grip that is rated minimum
250 V, 16 A.
