RUSH Strobe CWL
TM
User Manual
11
5. If you adjust the position of the fixture, tighten all fasteners once the
fixture is aimed correctly.
6. Secure the fixture with a safety cable as directed below.
Securing with a safety cable
Secure the fixture with a safety
cable (or other secondary
attachment) that is approved for
the weight of the fixture so that
the safety cable will hold the
fixture if a primary attachment
fails.
See illustration on right. Loop the
safety cable through the eye bolt
on the fixture’s rear panel and
around the truss or other secure
anchoring point.
See ‘Accessories’ on page 29 for
suitable safety cables.
Multiple fixture mounting bracket
A mounting bracket that holds four RUSH Strobe CWL fixtures is available
from Martin™ (see Accessories on page 29).
When using this mounting bracket, ensure that the bracket and all fixtures are
held safely and secured with approved safety cables. Each fixture must be
secured by its own safety cable. If four fixtures are installed on the bracket,
you must provide five safety cables: one for each fixture and one for the
mounting bracket.
