background image

 

30 

RUSH Strobe CWL

TM

 User Manual 

Power relay cable, 14 AWG, SJT, 1.5 mm

2

, H05VV-F, 

  with PowerCon connectors, 1.4 m (4.6 ft.) ............................... P/N  11541509 
Power relay cable, 14 AWG, SJT, 1.5 mm2, H05VV-F, 
  with PowerCon connectors, 2.25 m (7.4 ft.) ............................. P/N  11541510 
Power relay cable, 14 AWG, SJT, 1.5 mm

2

, H05VV-F, 

  with PowerCon connectors, 3.25 m (10.7 ft.) ........................... P/N  11541511 

Power connectors 

Neutrik PowerCon NAC3FCA  
  female connector for power in, cable mount, blue ................... P/N  05342804 
Neutrik PowerCon NAC3FCB  
  male connector for power out/thru, cable mount, light grey ..... P/N 05342805 

DMX-related items 

DMX termination plug, 3-pin male XLR ...................................... P/N  91613017 
5-pin male XLR to 3-pin female XLR adaptor ............................ P/N 11820005 

Installation hardware 

Four-unit bracket for RUSH Strobe CWL ................................... P/N  91606019 
Half-coupler clamp ..................................................................... P/N 91602005 
G-clamp ...................................................................................... P/N 91602003 
Safety cable, safe working load 50 kg ....................................... P/N  91604003 

Related Items  

RUSH Software Uploader 1™ .................................................... P/N  91611399 

Ordering Information  

RUSH Strobe CWL™ EU model in cardboard box .................... P/N  90480110 
RUSH Strobe CWL™ US model in cardboard box .................... P/N 90480115  

Specifications are subject to change without notice. For the latest product 
specifications, see 

www.martin.com

 

 
 
 

 

 

Disposing of this product 

RUSH by Martin™ products are supplied in compliance with Directive 
2012/19/EC of the European Parliament and of the Council of the 
European Union on WEEE (Waste Electrical and Electronic Equipment), 
where applicable. Help preserve the environment! Ensure that this 
product is recycled at the end of its life. Your supplier can give details of 
local arrangements for the disposal of RUSH by Martin™ products.

 

 

Summary of Contents for strobe cwl

































Reviews: