14
RUSH Strobe CWL
TM
User Manual
Fixture overview
1 – AC mains power input/output
Neutrik PowerCon sockets are provided to connect the fixture to mains power.
If you use 16 A, 14 AWG / 1.5 mm
2
cables (not supplied), up to 3 additional RUSH
Strobe CWL
TM
fixtures may be connected to mains power through the MAINS OUT
socket.
2 – Fuse
The main fuse is located on the rear panel in a fuse holder. Replace only with
one of the rating printed on the rear panel.
3 – Microphone
The built-in microphone provides sound-triggered activation in Show Mode.
4 – Secondary attachment point
An eyebolt is provided for attaching a safety cable (not supplied).
5 – Status LEDs
The 4 rear panel LEDs indicate the following:
LED
State
Indication
DMX
Flashing
DMX control signal present
Off
No DMX control signal present
Master
On
Fixture operating as master
Slave
On
Fixture operating as slave
Sound
Flashing
Microphone receiving sound signal