18
RUSH Strobe CWL
TM
User Manual
DMX Mode
The RUSH Strobe CWL
TM
has two DMX modes.
•
1CHAN mode provides simple 1-channel control of the strobe rate
and the “blinder” effect.
•
4CHAN mode provides control of the flash intensity, flash duration,
and flash rate on the first 3 DMX channels. When the flash rate is set
to 0 on channel 3, you can trigger a single flash on channel 1. The
fourth channel provides access to special effects: ramp up, ramp
down, ramp up-down, lightning, and random flash.
To set the fixture’s DMX mode:
1. Press MENU to enter the control menu.
2. Select CHANNEL MODE and press ENTER. The present mode setting
will blink on the display.
3. Use the UP and DOWN buttons to select 1CHAN or 4CHAN mode. Press
ENTER to set it.
4. Press MENU to exit.
Behavior when DMX signal is not present (DMX STATE)
By default, the fixture blacks out if the DMX signal is suddenly lost. For stand-
alone operation, where the fixture operates in Show Mode if DMX is lost,
select SHOW MODE as follows:
1. Press MENU to enter the control menu.
2. Select DMX STATE and press ENTER.
3. Use the UP and DOWN buttons to change from BLACKOUT to SHOW
MODE. Press ENTER to set it.
4. Press MENU to exit.
