Runco Vistage series, Operation Manual

Page: 85 / 94

Specifications
Vistage™ Series Flat-Panel Display Installation/Operation Manual 71
PRE
L
IMINAR
Y
7.1
V-50HD/V-63HD
Specifications Table 7-1 lists the V-50HD/V-63HD specifications.
7. S pecification s
Table 7-1. V-50HD/V-63HD S pecification s
Native Re s olution: Full HD 1920 x 1080 (1080p)
Diagonal S ize: V-50HD - 50 inches
V-63HD - 63 inches
A s pect Ratio s : Refer to Table 7-2
DTV Compatibility: Refer to Table 7-3
Proce ss ing: Runco DHD-LS Processor with ViVix IV™ technology and
BRiC (Backup, Recovery and Clone) tool
Control Option s : • Serial commands via RS-232
• Discrete infrared (IR) remote
• Consumer Electronics Control (CEC) protocol support via
HDMI
• Ethernet
Input s : Refer to Table 7-2
Video S tandard s : NTSC, PAL, SECAM, CEA-861D
Calibration: ISF Certified Calibration Configuration
Contra s t Ratio ( s equential): 1,000,000:1 typical; 10,000:1 minimum
Power Requirement s : 100 VAC to 240 VAC +/- 10% @ 50/60Hz
Power Con s umption: V-50HD - 400W maximum; 1W standby
V-63HD - 625W maximum; 1W standby
Operating Temperature: 10°C to 40°C, up to 9,100 feet altitude
Operating Humidity: 20 - 80% humidity (non-condensing)
Dimen s ion s : V-50HD - See Figure 7-1
V-63HD - See Figure 7-2
Weight: V-50HD - 75 lbs. (34.0 kg)
V-63HD - 125 lbs. (56.7 kg)
Regulatory Approval s : FCC Class B, CE, C-Tick
Limited Warranty: Two (2) years parts and labor from the date of shipment from
Runco. Extended RuncoCare™, Runco Red Carpet™ and
PremierCare™ plans also available.
S pecification s are s ubject to change without notice.