Operation
Vistage™ Series Flat-Panel Display Installation/Operation Manual
39
PRE
L
IMINAR
Y
You should save changes to any of the following settings to a preset; otherwise they will
be lost when a new input source or resolution is selected:
• Brightness
• Contrast
• Color saturation
• Tint
• Sharpness
• Gamma
• Color temperature and white balance
To select a memory preset, press
or
to highlight it and press
ENTER
.
To save the settings for the current input and display mode to the Custom 1 or Custom 2
memory preset, select it, press
or
to highlight Save and press
ENTER
.
To reset the Custom 1 or Custom 2 memory preset to its factory-default state, select it,
press
or
to highlight Reset and press
ENTER
.
Sleep Timer
Select Sleep Timer from the Main Menu to turn off the V-50HD/V-63HD after a specified
interval. Press
or
to select Off, 30 Minutes, 60 Minutes, 90 Minutes, 2 Hours or
4 Hours. Then, press
ENTER.
To save the settings for the current input and display mode to the
ISF Night or ISF Day memory preset, select Save ISF Night or Save
ISF Day from the Calibration menu (refer to
Save ISF Night/Save
ISF Day
on page 44).
Note
S
leep Timer
Î
Off
30 Minutes
60 Minutes
90 Minutes
2 Hours
4 Hours