Controls and Functions
8
Vistage™ Series Flat-Panel Display Installation/Operation Manual
PRE
L
IMINAR
Y
2.3
DHD Controller Rear
Panel
Figure 2-5 shows the rear connector panel on the DHD Controller.
Figure 2-5. DHD Controller Rear Panel
1.
POWER INPUT (100 to 240 VAC)
Connect the DHD Controller to power here.
2.
HD1 / HD2 (5 x Analog BNC
s
)
Two inputs (five BNCs per input) for connecting standard-definition (SD = 480i/576i),
enhanced-definition (ED = 480p/576p) or high-definition (HD = 720p/1080i/1080p)
component video sources, or RGBHV sources such as personal computers.
3.
Component /
S
CART (3 x RCA connector
s
)
SD/HD input for connecting SDTV, EDTV or HDTV component video sources. Also
provides RGB input for SCART RGBS sources.
4.
Video 1 / Video 2 / Video 3
Standard, composite video inputs for connecting a VCR, camcorder or other
composite video source. The Video 1 input also provides composite sync input for
SCART RGBS sources.
5.
HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 (Digital)
HDCP-compliant digital video inputs for connecting an HDMI or DVI source.
6.
Ethernet
A female RJ-45 connector for wired network communications.
7.
HDMI Out (Audio Only)
Connect this output to an audio control system to pass through HDMI audio.
8.
HDMI Out (To Di
s
play)
Connect this to an HDMI input on your display device.
9.
R
S
-232 (PC / Control)
A female, 9-pin D-sub connector for interfacing with a PC or automation/control
system.
Video 1
Y
Video 2
Video 3
Pr
Pb
PC / Control
RS-232
HDMI 2
HDMI 4
Ethernet
HDMI Out
To Display
HDMI Out
Audio Only
HD1
HD2
deo
Y
Video 1
Pr
Pb
1
2
Video 1
H
H
9
6
2
1
HDMI 2
HDMI 4
HDMI 2
HDMI 4
5
3
8
7
4
Video 2
Video 3
Video 11
Vid
1
The DHD Controller does not transmit HDMI CEC control
messages from the “HDMI Audio Out” connector.
Note
