57
Section 3: Operation
Section 3: Operation
DETAIL THRESHOLD —
Use “Detail Threshold” to define at what frequency level the
“Detail” control will begin to magnify high frequencies, which adds details back into the
image. Raise the threshold to
ignore
more of these high frequencies, and lower the
threshold to
magnify
more of these frequencies. A setting of “0”, for example, means no
noise will be ignored and all will be magnified. An ideal detail threshold is one in which
high frequencies that are causing objectionable noise are
not
magnified when using
“Detail”, but frequencies which can help sharpen an overly-soft image
are
magnified
when using “Detail”.
Use the
Configuration
menu to
define general operating parameters
and communications with other
projectors and equipment, and to
access other advanced processing
and image adjustments affecting
overall performance. In addition, the
Configuration
menu provides access
to diagnostic and calibration tools,
as well as the
Service
submenu
(password protected).
Keep in mind that settings in the
Configuration
menu (and its submenus) are typically
“global” settings applied regardless of the type of source your are using. This characteristic
is identified with the (globe) icon alongside the option.
NOTE: The
Configuration
menu is
recommended for experienced users/technicians only.
The first six options in the
Configuration
menu are explained below:
Language
Choose from available languages to use in the projector’s menus. The change will take
effect immediately.
Image Orientation
Set the orientation of the image according to the orientation of your projector. If the
setting is incorrect, projected images will be reversed and/or upside down.
Fade Time
Set how long (in seconds) it takes to gradually dissolve one image into another for a
source switch.
Auto Power-up
Enter a checkmark to enable the projector to automatically power up after losing power
due to a power failure or due to unplugging the projector during operation. Runco
recommends that this be left unchecked, as a power loss in an unattended house will
result in the projector turning on without anyone realizing it is on.
Note that unsaved display adjustments may be lost.
Set Date & Time
Enter/read the current year-month-day and hour-minute-second. Changes here reset the
projector’s real-time clock.
3.6 Adjusting System
Parameters and
Advanced Controls
➤
System Configuration
— GENERAL —