manualshive.com logo in svg

Runco Video Xtreme VX-40d, Owner'S Operating Manual, Page: 88 / 102

Share
Download
Runco Video Xtreme VX-40d Owner'S Operating Manual Download Page 88

88

Projector Type:

Digital Light Processing™ (DLP™),  
3-Chip, Darkchip2™ DMD™

Native Resolution:

1400 x 1050

Aspect Ratios:

Determined by Supplied DHD Video Processor

Video Standards:

NTSC, PAL

DTV Compatibility:

480p, 720p, 1080i

Scan Frequency:

Horizontal: 15 – 120kHz, 
Vertical: 23.97 – 150Hz

Picture Size 
(16:9 screens)

Recommended Width: 72 – 192 in. 
Maximum Width: 300 in.

Throw Distance  
(Factor x Screen Width)

Lens Option 1: Zoom 4.48 – 7.15 
Lens Option 2: Zoom 1.48 – 1.75 
Lens Option 3: Zoom 1.81 – 2.40 
Lens Option 4: Zoom 2.56 – 4.35 
Lens Option 5: Fixed 0.75 (for rear screen applications)

Horizontal and  
Vertical Offset:

Horizontal offset varies per lens up to 50%, Vertical offset varies per 
lens, up to 100%; Short Throw: H: 69%, V: 37%
(Contact Runco technical support for installation details.)

Light Output:

CSMS** Specifications: Home Theater Calibration: 2360 ANSI 
Lumens; 
94 Foot-Lamberts (fL); 
4000 ANSI Lumens

Contrast Ratio:

CSMS** Contrast Ratio: 227:1 – 282:1; 1500 – 1800:1; (Variable 
depending on lens aperture setting)

Lamp:

1000W Xenon lamp module

Lamp Life:

1000 Hours @ 6500 Kelvin

Inputs:

(1) Composite, (1) S-Video, (1) DVI,  
(1) RGB/ Component, (1) RS-232, (1) RS-422

12V Output:

See Controller for Specifications

Power Requirements:

100-240V AC, 50/60Hz, 1700W

Operating Environments:

40 to 95ºF (5 to 35ºC); 20-80% humidity 
(non-condensing)

Dimensions (w/o feet):

Width: 29 1/32 in. (737 mm) 
Depth: 28 6/25 in. (717 mm) 
Height: 12 7/32 in. (311 mm) 
Weight: 85 lbs. (38.55kg) 
(without lens)

Regulatory Approvals:

Complies with FCC Class B, CE, C-Tick

Limited Warranty:

Projector: (2) Two years parts and labor from the date of delivery to 
the end user. 
Lamp Warranty: 1000 hours or (6) Six months, which ever comes 
first.

VX-60d

 

➤

Section 6: Specifications

Section 6: Specifications

Summary of Contents for Video Xtreme VX-40d







































































































Reviews:

No comments